H3C IE4300 Command Reference Manual page 1640

Field
Sub-VLANs (1 in total)
Related commands
reset ipv6 multicast-vlan group
ipv6 multicast-vlan
Use
ipv6 multicast-vlan
view of an existing IPv6 multicast VLAN.
Use
undo ipv6 multicast-vlan
Syntax
ipv6 multicast-vlan vlan-id
undo ipv6 multicast-vlan { all | vlan-id }
Default
No IPv6 multicast VLANs exist.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies an existing VLAN ID in the range of 1 to 4094.
vlan-id
: Specifies all IPv6 multicast VLANs.
all
Usage guidelines
The total number of IPv6 multicast VLANs on the device cannot exceed 5.
You must enable MLD snooping for the VLAN to be configured as an IPv6 multicast VLAN.
Examples
# Enable MLD snooping for VLAN 100. Configure VLAN 100 as an IPv6 multicast VLAN and enter its
view.
<Sysname> system-view
[Sysname] mld-snooping
Description
multicast VLAN.
•
0x40—The entry is to be deleted.
•
0x10000000—This value represents one of the following
situations:
The entry is newly created.

The device receives an MLD query within an MLD

general query interval.
•
0x20000000—The device does not receive MLDv1 or
MLDv2 reports that match the entry within an MLD
general query interval.
•
0x40000000—The device does not receive MLDv2 IS_EX
(NULL) reports that match the entry within an MLD
general query interval.
Sub-VLAN list of the IPv6 multicast VLAN, and the total number
of the sub-VLANs.
to configure an IPv6 multicast VLAN and enter its view, or enter the
to remove the configuration of IPv6 multicast VLANs.
5