H3C IE4300 Command Reference Manual page 1609

mld-snooping max-response-time
Use
mld-snooping max-response-time
queries in a VLAN.
Use
undo mld-snooping max-response-time
Syntax
mld-snooping max-response-time seconds
undo mld-snooping max-response-time
Default
The maximum response time for MLD general queries is 10 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
: Specifies the maximum response time for MLD general queries, in the range of 1 to 3174
seconds
seconds.
Usage guidelines
You must enable MLD snooping for a VLAN before you execute this command.
You can set the time for a VLAN in VLAN view or globally for all VLANs in MLD-snooping view. For a
VLAN, the VLAN-specific configuration takes priority over the global configuration.
To avoid mistakenly deleting IPv6 multicast group members, set the maximum response time for
MLD general queries to be less than the MLD general query interval.
Examples
# In VLAN 2, enable MLD snooping, and set the maximum response time for MLD general queries to
5 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping max-response-time 5
Related commands
(MLD-snooping view)
enable
max-response-time
mld-snooping enable
mld-snooping query-interval
mld-snooping overflow-replace
Use mld-snooping overflow-replace
feature on a port.
(MLD-snooping view)
37
to set the maximum response time for MLD general
to restore the default.
to enable the IPv6 multicast group replacement