H3C IE4300 Command Reference Manual page 1683

IPv6 ACL 2000
rule 0 permit
MAC ACL 4000
IPv4 default action: Deny
IPv6 default action: Deny, Hardware-count (Failed)
MAC default action: Deny
Table 4 Command output
Field
Interface
Inbound policy
Outbound policy
IPv4 ACL 2001
IPv4 ACL 2002 (Failed)
Hardware-count
Hardware-count (Failed)
rule 5 permit source 1.1.1.1 0 (Failed)
IPv4 default action
IPv6 default action
MAC default action
Description
Interface to which the ACL applies.
ACL used for filtering incoming traffic.
ACL used for filtering outgoing traffic.
IPv4 basic ACL 2001 has been successfully applied.
The device has failed to apply IPv4 basic ACL 2002.
ACL rule match counting in hardware has been successfully
enabled.
The device has failed to enable counting ACL rule matches in
hardware.
The device has failed to apply rule 5.
Packet filter default action for packets that do not match any
IPv4 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the
default action deny for packet filtering. The action permit
still functions.
•
Permit—The default action permit has been
successfully applied for packet filtering.
Packet filter default action for packets that do not match any
IPv6 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the
default action deny for packet filtering. The action permit
still functions.
•
Permit—The default action permit has been
successfully applied for packet filtering.
Packet filter default action for packets that do not match any
Layer 2 ACLs:
•
Deny—The default action deny has been successfully
applied for packet filtering.
•
Deny (Failed)—The device has failed to apply the
default action deny for packet filtering. The action permit
still functions.
•
Permit—The default action permit has been
successfully applied for packet filtering.
14