H3C IE4300 Command Reference Manual page 1618

: Specifies all IPv6 multicast groups and all IPv6 multicast sources and groups.
all
Examples
# Configure GigabitEthernet 1/0/1 as a static member port for the IPv6 multicast group (
in VLAN 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] quit
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mld-snooping static-group ff3e::101 vlan 2
mld-snooping static-router-port
Use
mld-snooping static-router-port
Use
undo mld-snooping static-router-port
ports.
Syntax
mld-snooping static-router-port vlan vlan-id
undo mld-snooping static-router-port { all | vlan vlan-id }
Default
A port is not a static router port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
: Specifies all VLANs.
all
vlan vlan-id
Examples
# Configure GigabitEthernet 1/0/1 as a static router port in VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] mld-snooping static-router-port vlan 2
mld-snooping version
Use
mld-snooping version
Use
undo mld-snooping version
Syntax
mld-snooping version version-number
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
to specify an MLD snooping version for a VLAN.
to configure a port as a static router port.
to remove the configuration of static router
to restore the default.
46
* , FF3E::101)