H3C IE4300 Command Reference Manual page 1539

igmp-snooping router-port-deny
Use
igmp-snooping router-port-deny
port.
Use
undo igmp-snooping router-port-deny
port.
Syntax
igmp-snooping router-port-deny [ vlan vlan-list ]
undo igmp-snooping router-port-deny [ vlan vlan-list ]
Default
A port is allowed to become a dynamic router port.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
vlan vlan-list
VLAN by its ID or a range of VLANs in the form of
ID is in the range of 1 to 4094. If you specify VLANs, this command takes effect only when the port
belongs to the specified VLANs. If you do not specify a VLAN, this command takes effect on all
VLANs to which the port belongs.
Examples
# Disable GigabitEthernet 1/0/1 from becoming a dynamic router port in VLAN 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] igmp-snooping router-port-deny vlan 2
igmp-snooping source-deny
Use
igmp-snooping source-deny
all multicast data packets.
Use
undo igmp-snooping source-deny
Syntax
igmp-snooping source-deny
undo igmp-snooping source-deny
Default
Multicast source port filtering is disabled.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a
to enable multicast source port filtering on a port to discard
to disable a port from becoming a dynamic router
to allow a port to become a dynamic router
start-vlan-id to end-vlan-id
to disable multicast source port filtering on a port.
43
. The VLAN