Ripng Ipsec-Profile - H3C IE4300 Command Reference Manual

Syntax
ripng process-id enable
undo ripng enable
Default
RIPng is disabled on an interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
process-id
Examples
# Enable RIPng 100 on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng 100 enable

ripng ipsec-profile

Use
ripng ipsec-profile
Use
undo ripng ipsec
Syntax
ripng ipsec-profile profile-name
undo ripng ipsec-profile
Default
No IPsec profile is applied to a RIPng interface.
Views
Interface view
Predefined user roles
network-admin
Parameters
profile-name
characters.
Usage guidelines
To configure an IPsec profile, see IPsec in Security Configuration Guide.
Examples
# Apply IPsec profile profile001 to VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng ipsec-profile profile001
: Specifies a RIPng process by its ID in the range of 1 to 65535.
to apply an IPsec profile to a RIPng interface.
-
profile
: Specifies an IPsec profile by its name, a case-insensitive string of 1 to 63
to remove the IPsec profile from the RIPng interface.
20