H3C IE4300 Command Reference Manual page 1507

Field
leaves
reports with right and wrong records
specific sg queries
PIMv2 hello
error IGMP messages
Related commands
reset igmp-snooping statistics
display l2-multicast fast-forwarding cache
Use
display l2-multicast fast-forwarding cache
forwarding entries.
Syntax
display
[ source-address | group-address ] * [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vlan vlan-id
source-address
this command displays Layer 2 multicast fast forwarding entries for all multicast sources.
group-address
239.255.255.255. If you do not specify a multicast group, this command displays Layer 2 multicast
fast forwarding entries for all multicast groups.
slot slot-number
member device, this command displays Layer 2 multicast fast forwarding entries for the master
device.
Examples
# Display Layer 2 multicast fast forwarding entries.
<Sysname> display l2-multicast fast-forwarding cache
Total 1 entries, 1 matched
(10.1.1.2,225.1.1.1)
Status
Source port : 9876
Protocol
Ingress port: GigabitEthernet1/0/2
List of 1 egress ports:
l2-multicast fast-forwarding
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
: Specifies a multicast source address. If you do not specify a multicast source,
: Specifies a multicast group address in the range of 224.0.1.0 to
: Specifies an IRF member device by its member ID. If you do not specify a
: Enable
: 17
Description
Number of IGMP leave messages.
Number of IGMP reports with correct and incorrect records.
Number of IGMP group-and-source-specific queries.
Number of PIMv2 hello messages.
Number of IGMP messages with errors.
cache
VLAN
Destination port: 5432
Flag
11
to display Layer 2 multicast fast
[ vlan vlan-id
: 1
: 0x2
]