H3C IE4300 Command Reference Manual page 1596

Examples
# Set the global MLD last listener query interval to 3 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] last-listener-query-interval 3
Related commands
mld-snooping last-listener-query-interval
max-response-time (MLD-snooping view)
Use
max-response-time
Use
undo max-response-time
Syntax
max-response-time seconds
undo max-response-time
Default
The maximum response time for MLD general queries is 10 seconds.
Views
MLD-snooping view
Predefined user roles
network-admin
Parameters
seconds : Specifies the maximum response time for MLD general queries, in the range of 1 to 3174
seconds.
Usage guidelines
You can set the time globally for all VLANs in MLD-snooping view or for a VLAN in VLAN view. For a
VLAN, the VLAN-specific configuration takes priority over the global configuration.
To avoid mistakenly deleting IPv6 multicast group members, set the maximum response time for
MLD general queries to be less than the MLD general query interval.
Examples
# Set the global maximum response time for MLD general queries to 5 seconds.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] max-response-time 5
Related commands
mld-snooping max-response-time
mld-snooping query-interval
mld-snooping
Use
mld-snooping
Use
undo mld-snooping
to set the maximum response time for MLD general queries globally.
to restore the default.
to enable the MLD snooping feature and enter MLD-snooping view.
to disable the MLD snooping feature.
24