H3C IE4300 Command Reference Manual page 1563

display multicast-vlan forwarding-table
Use
display multicast-vlan forwarding-table
entries.
Syntax
display
{ mask-length | mask } ] | source-address [ mask { mask-length | mask } ] |
slot slot-number | subvlan vlan-id | vlan vlan-id ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-address
239.255.255.255. If you do not specify a multicast group, this command displays multicast VLAN
forwarding entries for all multicast groups.
mask { mask-length | mask }
address. The value range for the
for the
mask
source-address
source, this command displays multicast VLAN forwarding entries for all multicast sources.
mask { mask-length | mask }
address. The value range for the
for the
mask
slot slot-number
member device, this command displays multicast VLAN forwarding entries for the master device.
subvlan vlan-id
command displays multicast VLAN forwarding entries for all sub-VLANs.
vlan vlan-id
specify a multicast VLAN, this command displays multicast VLAN forwarding entries for all multicast
VLANs.
Examples
# Display all multicast VLAN forwarding entries.
<Sysname> display multicast-vlan forwarding-table
Multicast VLAN 100 Forwarding Table
Total 1 entries, 1 matched
00001. (1.1.1.1, 225.0.0.1)
Flags: 0x10000
Multicast VLAN: 100
List of sub-VLANs (3 in total):
1: VLAN 10
2: VLAN 20
3: VLAN 30
multicast-vlan
: Specifies a multicast group by its IP address in the range of 224.0.0.0 to
: Specifies a mask length or subnet mask for the multicast group
mask-length
argument is 255.255.255.255.
: Specifies a multicast source by its IP address. If you do not specify a multicast
: Specifies a mask length or subnet mask for the multicast source
mask-length
argument is 255.255.255.255.
: Specifies an IRF member device by its member ID. If you do not specify a
: Specifies a sub-VLAN by its VLAN ID. If you do not specify a sub-VLAN, this
: Specifies a multicast VLAN by its VLAN ID in the range of 1 to 4094. If you do not
forwarding-table
argument is 4 to 32 (default), and the default value
argument is 0 to 32 (default), and the default value
2
to display multicast VLAN forwarding
[ group-address [ mask