H3C IE4300 Command Reference Manual page 1465

Field
Interface
Related commands
ipv6 policy-based-route
if-match acl
Use
if-match acl
Use
undo if-match acl
Syntax
if-match acl { ipv6
undo if-match acl
Default
No ACL match criterion is set.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
-
ipv6 acl-number
range of a basic ACL is 2000 to 2999 and that of an advanced ACL is 3000 to 3999.
name ipv6
characters starting with a letter. The ACL name cannot be all. For the command to take effect, make
sure the specified IPv6 ACL is a basic or advanced ACL.
Usage guidelines
If the specified ACL does not exist or has no rules configured, all packets will match the ACL.
If the vpn-instance
vpn-instance
packets.
Examples
# Configure Node 10 of policy aa to permit the packets matching ACL 2000.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 10
[Sysname-pbr6-aa-10] if-match acl 2000
# Configure Node 10 of policy aa to permit the packets matching ACL aaa.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 10
[Sysname-pbr6-aa-10] if-match acl name aaa
(interface view)
to set an ACL match criterion.
to restore the default.
-
acl-number | name ipv6
: Specifies an IPv6 ACL by its number in the range of 2000 to 3999. The value
- : Specifies an IPv6 ACL by its name, a case-insensitive string of 1 to 63
acl-name
keyword is specified for an ACL rule, the ACL does not take effect. If the
keyword is not specified, the rule applies to both public and private network
Description
Interface where the policy is applied.
This field displays N/A for IPv6 local PBR and IPv6
global PBR.
-
acl-name }
7