H3C IE4300 Command Reference Manual page 1217

Area
MPLS TE not enabled
Authtype
Area flag
7/5 translator state
7/5 translate stability timer interval
SPF scheduled Count
Interface
Cost
State
Type
MTU
Priority
Timers
FRR backup
Enabled by interface configuration
Delete router—Delete routes of routers.

Delete intra AS—Delete intra-AS routes

Delete inter AS—Delete AS-external routes.

Delete forward address—Delete forwarding

address list.
Delete advertise—Delete advertising router list.

•
Route redistribution (R) module:
N/A—Not reset.

Delete ABR summary—Delete summary routes of

the ABR.
Delete ASBR summary—Delete summary routes of

the ASBR.
Delete import—Delete redistributed routes.

Area ID in the IP address format.
Status of MPLS TE for the OSPF area, which can be MPLS
TE not enabled or MPLS TE enabled.
Authentication type of the area:
•
None—No authentication.
•
Simple—Simple authentication.
•
MD5—MD5 authentication.
Type of the area:
•
Normal.
•
Stub.
•
StubNoSummary (totally stub area).
•
NSSA.
•
NSSANoSummary (totally NSSA area).
State of the translator that translates Type-7 LSAs to Type-5
LSAs:
•
Enabled—The translator is specified through
commands.
•
Elected—The translator is designated through election.
•
Disabled—The device is not a translator.
Stability interval for Type-7 LSA-to-Type-5 LSA translation.
SPF calculation count in the OSPF area.
Interface in the area.
Interface cost.
Interface state.
Interface network type.
Interface MTU.
Router priority.
OSPF timers:
•
Hello—Interval for sending hello packets.
•
Dead—Interval within which the neighbor is down.
•
Poll—Interval for sending hello packets.
•
Retransmit—Interval for retransmitting LSAs.
Whether Loop Free Alternate (LFA) calculation is enabled on
an interface.
OSPF is enabled on the interface. including secondary IP
16