H3C IE4300 Command Reference Manual page 1497

IGMP snooping commands
display igmp-snooping
Use
display igmp-snooping
Syntax
display igmp-snooping [ global | vlan vlan-id ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Displays the global IGMP snooping status.
global
vlan vlan-id
Usage guidelines
If you do not specify any parameters, this command displays the global IGMP snooping status and
the IGMP snooping status in all VLANs.
Examples
# Display the global IGMP snooping status and the IGMP snooping status for all VLANs.
<Sysname> display igmp-snooping
IGMP snooping information: Global
Global-enable: Enabled
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-member-query-interval: 1s
Report-aggregation: Enabled
Host-tracking: Disabled
Dot1p-priority: --
IGMP snooping information: VLAN 1
IGMP snooping: Enabled
Drop-unknown: Disabled
Version: 2
Host-aging-time: 260s
Router-aging-time: 260s
Max-response-time: 10s
Last-member-query-interval: 1s
Querier: Enabled (IP: 1.1.1.1, Expires: 00:02:05)
Querier-election: Enabled
Query-interval: 125s
General-query source IP: 1.1.1.1
to display IGMP snooping status.
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094.
1