H3C IE4300 Command Reference Manual page 1619

undo mld-snooping version
Default
The MLD snooping version in a VLAN is 1.
Views
VLAN view
Predefined user roles
network-admin
Parameters
version-number
Usage guidelines
You must enable MLD snooping for a VLAN before you configure this command.
You can specify the version for a VLAN in VLAN view or for the specified VLANs in MLD-snooping
view. The VLAN-specific configuration has the same priority as the configuration in MLD-snooping
view, and the most recent configuration takes effect.
Examples
# In VLAN 2, enable MLD snooping, and specify MLD snooping version 2.
<Sysname> system-view
[Sysname] mld-snooping
[Sysname-mld-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] mld-snooping enable
[Sysname-vlan2] mld-snooping version 2
Related commands
enable (MLD-snooping view)
mld-snooping enable
(MLD-snooping view)
version
overflow-replace (MLD-snooping view)
Use
overflow-replace
Use
undo overflow-replace
Syntax
overflow-replace [ vlan vlan-list ]
undo overflow-replace [ vlan vlan-list ]
Default
The IPv6 multicast group replacement feature is disabled.
Views
MLD-snooping view
Predefined user roles
network-admin
: Specifies an MLD snooping version, 1 or 2.
to enable the IPv6 multicast group replacement feature globally.
to disable the IPv6 multicast group replacement feature globally.
47