H3C IE4300 Command Reference Manual page 1468

If a policy node is specified, the
specified policy node. If a match mode is specified, the command deletes all nodes configured with
the match mode. If no node is specified, the command deletes the whole policy.
Examples
# Create permit-mode Node 10 for IPv6 policy aaa and enter its view.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aaa permit node 10
[Sysname-pbr6-aaa-10]
Related commands
display ipv6 policy-based-route
reset ipv6 policy-based-route statistics
Use reset ipv6 policy-based-route statistics
Syntax
reset ipv6 policy-based-route statistics [ policy policy-name ]
Views
User view
Predefined user roles
network-admin
Parameters
policy policy-name
If you do not specify a policy, this command clears IPv6 PBR statistics for all policies.
Examples
# Clear all IPv6 PBR statistics.
<Sysname> reset ipv6 policy-based-route statistics
Related commands
display ipv6 policy-based-route interface
display ipv6 policy-based-route local
undo ipv6 policy-based-route
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
10
command deletes the
to clear IPv6 PBR statistics.