H3C IE4300 Command Reference Manual page 1755

Examples
# Create a queue scheduling profile named myprofile and enter queue scheduling profile view.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile]
Related commands
display qos qmprofile interface
queue
queue
Use
queue
Use
undo queue
Syntax
queue queue-id { sp | wrr group group-id weight schedule-value }
undo queue queue-id
Default
All queues in a queue scheduling profile are SP queues.
Views
Queue scheduling profile view
Predefined user roles
network-admin
Parameters
: Specifies a queue by its ID. The value range for this argument is 0 to 7 or keywords in
queue-id
Table 18.
: Enables SP for the queue.
sp
: Enables WRR for the queue.
wrr
group group-id
: Allocates bandwidth to queues in packets.
weight
schedule-value
Examples
# Create a queue scheduling profile named myprofile, and configure queue 0 to use SP.
<Sysname> system-view
[Sysname] qos qmprofile myprofile
[Sysname-qmprofile-myprofile] queue 0 sp
# Create a queue scheduling profile named myprofile. Configure queue 1 to meet the following
requirements:
•
The WRR queuing is used.
•
The WRR group is group 1.
•
The scheduling weight is 10.
<Sysname> system-view
to configure queue scheduling parameters.
to delete queue scheduling parameter settings.
: Specifies a WRR group by its ID. The group ID can only be 1.
: Specifies the scheduling weight. The value range for this argument is 1 to 15.
48