H3C IE4300 Command Reference Manual page 1641

[Sysname-mld-snooping] quit
[Sysname] vlan 100
[Sysname-vlan100] mld-snooping enable
[Sysname-vlan100] quit
[Sysname] ipv6 multicast-vlan 100
[Sysname-ipv6-mvlan-100]
Related commands
mld-snooping enable
ipv6 multicast-vlan entry-limit
Use
ipv6 multicast-vlan entry-limit
forwarding entries.
Use
undo ipv6 multicast-vlan entry-limit
Syntax
ipv6 multicast-vlan entry-limit limit
undo ipv6 multicast-vlan entry-limit
Default
The maximum number of multicast VLAN forwarding entries is 120.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies the maximum number of IPv6 multicast VLAN forwarding entries,in the range of 0
limit
to 120.
Usage guidelines
If the configured value is smaller than the current number of IPv6 multicast VLAN forwarding entries,
the device cannot create new entries until some entries age out or are manually removed. To allow
new entries to be created immediately, use the
to remove IPv6 multicast VLAN forwarding entries.
Examples
# Set the maximum number of IPv6 multicast VLAN forwarding entries to 120.
<Sysname> system-view
[Sysname] ipv6 multicast-vlan entry-limit 120
Related commands
entry-limit
ipv6 port multicast-vlan
Use
ipv6 port multicast-vlan
Use
undo ipv6 port multicast-vlan
(MLD-snooping view)
to set the maximum number of IPv6 multicast VLAN
to restore the default.
reset ipv6 multicast-vlan group
to assign a user port to an IPv6 multicast VLAN.
to restore the default.
6
command