H3C IE4300 Command Reference Manual page 1548

Views
User view
Predefined user roles
network-admin
Parameters
: Specifies all dynamic router ports.
all
vlan vlan-id
VLAN, this command clears dynamic router port information for all VLANs.
Examples
# Clear dynamic router port information.
<Sysname> reset igmp-snooping router-port all
Related commands
display igmp-snooping router-port
reset igmp-snooping statistics
Use
reset igmp-snooping statistics
hello messages learned through IGMP snooping.
Syntax
reset igmp-snooping statistics
Views
User view
Predefined user roles
network-admin
Examples
# Clear the statistics for all IGMP messages and PIMv2 hello messages learned through IGMP
snooping.
<Sysname> reset igmp-snooping statistics
Related commands
display igmp-snooping statistics
reset l2-multicast fast-forwarding cache
Use
reset l2-multicast fast-forwarding cache
forwarding entries.
Syntax
reset l2-multicast
{ { source-address | group-address } * | all } [ slot slot-number ]
Views
Any view
Predefined user roles
network-admin
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
fast-forwarding
to clear statistics for IGMP messages and PIMv2
cache
52
to clear Layer 2 multicast fast
[ vlan vlan-id ]