7
...
Table 15 Command output
Field
Interface
Output queue
Group
Weight
SP commands
display qos queue sp interface
Use
display qos queue sp interface
Syntax
display qos queue sp interface [ interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number
not specify an interface, this command displays the SP queuing configuration of all interfaces.
Examples
# Display the SP queuing configuration of GigabitEthernet 1/0/1.
<Sysname> display qos queue sp interface gigabitethernet 1/0/1
Interface: GigabitEthernet1/0/1
Output queue: Strict Priority queuing
Table 16 Command output
Field
Interface
Output queue
qos sp
Use
qos sp
Use
undo qos sp
cs7
1
Description
Interface name, including the interface type and interface number.
Type of the current output queue.
Number of the group that holds the queue.
Packet-count scheduling weight of the queue. N/A is displayed for a
queue that uses the SP scheduling algorithm.
to enable SP queuing on an interface.
to restore the default.
15
to display the SP queuing configuration of an interface.
: Specifies an interface by its type and number. If you do
Description
Interface type and interface number.
Type of the current output queue.
40