H3C IE4300 Command Reference Manual page 1486

Predefined user roles
network-admin
network-operator
Parameters
name prefix-list-name
63 characters. If you do not specify this option, the command displays statistics for all IPv6 prefix
lists.
Examples
# Display the statistics for all IPv6 prefix lists.
<Sysname> display ipv6 prefix-list
Prefix-list6: 666
Permitted 0
Denied 0
index: 10
Table 3 Command output
Field
Prefix-list6
Permitted
Denied
index
permit
6::/64
ge
le
Related commands
ipv6 prefix-list
reset ipv6 prefix-list
if-match ipv6
Use
if-match ipv6
matches an ACL or IPv6 prefix list.
Use
undo if-match ipv6
Syntax
if-match ipv6 { address | next-hop | route-source } { acl ipv6-acl-number |
prefix-list prefix-list-name
undo if-match ipv6 { address | next-hop | route-source } [ acl | prefix-list ]
Default
No ACL or IPv6 prefix list match criterion is configured.
: Specifies an IPv6 prefix list by its name, a case-sensitive string of 1 to
Permit 6::/64
Description
Name of the IPv6 prefix list.
Number of routes matching the criterion.
Number of routes not matching the criterion.
Index number of an item.
Match mode of the item:
•
Permit.
•
Deny.
IPv6 address and prefix length for matching.
Greater-equal, the lower prefix length limit.
Less-equal, the upper prefix length limit.
to match IPv6 routes whose destination, next hop, or source address
to remove the specified ACL or IPv6 prefix list match criterion.
17
ge 66 le 88