H3C IE4300 Command Reference Manual page 1467

Views
Interface view
Predefined user roles
network-admin
Parameters
policy-name
specified policy must already exist.
Examples
# Apply policy aaa to VLAN-interface 2.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] ipv6 policy-based-route aaa
Related commands
display ipv6 policy-based-route setup
ipv6 policy-based-route
ipv6 policy-based-route (system view)
Use
ipv6 policy-based-route
view of an existing IPv6 policy node.
Use
undo ipv6 policy-based-route
Syntax
ipv6 policy-based-route policy-name [ deny | permit ] node node-number
undo ipv6 policy-based-route policy-name [ deny | node node-number |
permit ]
Default
No IPv6 policy nodes exist.
Views
System view
Predefined user roles
network-admin
Parameters
policy-name
: Specifies the match mode for the policy node as deny.
deny
: Specifies the match mode for the policy node as permit (default mode).
permit
node node-number
priority. The value range for the
Usage guidelines
To delete an IPv6 policy that has already applied to an interface, you must delete the policy from the
interface first.
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters. The
(system view)
: Specifies a policy name, a case-sensitive string of 1 to 19 characters.
: Specifies the number of the IPv6 policy node. A smaller number has a higher
node-number
to create an IPv6 policy node and enter its view, or enter the
to delete an IPv6 policy or IPv6 policy node.
argument is 0 to 255.
9