Table of Contents
Advertisement
dscp dscp
flow-label
flow-label-value
fragment
logging
routing
type
[
routing-type
]
hop-by-hop
type
[
hop-type
]
time-range
time-range-name
vpn-instance
vpn-instance-name
If the
argument is
protocol
Specifies a DSCP
preference.
Specifies a flow label
value in an IPv6 packet
header.
Applies the rule only to
fragments.
Logs the number of
matching packets.
Specifies an IPv6 routing
header type.
Specifies an IPv6
Hop-by-Hop Options
header type.
Specifies a time range for
the rule.
Applies the rule to an
MPLS L3VPN instance.
(6) or
(17), set the parameters shown in
tcp
udp
28
packet-filter ipv6
match counting in hardware for all rules in an
counting
ACL. If the
keyword is not specified,
matches for the rule are not counted in software.
dscp
The
argument can be a number in the
range of 0 to 63, or in words,
af13
af21
(12),
(14),
af31
af32
(22),
(26),
af42
af43
(34),
(36),
(38),
cs3
cs4
cs5
(24),
(32),
default
ef
(56),
(0), or
flow-label-value
The
range of 0 to 1048575.
If you do not specify this keyword, the rule
applies to all fragments and non-fragments.
This feature requires that the module (for
example, packet filtering) that uses the ACL
supports logging.
routing-type
: Value of the IPv6 routing
header type, in the range of 0 to 255.
type routing-type
If you specify the
option, the rule applies to the specified type of
IPv6 routing header. If you do not specify the
type routing-type
applies to all types of IPv6 routing headers.
hop-type
: Value of the IPv6 Hop-by-Hop
Options header type, in the range of 0 to 255.
type hop-type
If you specify the
rule applies to the specified type of IPv6
Hop-by-Hop Options header. If you do not
type hop-type
specify the
applies to all types of IPv6 Hop-by-Hop Options
header.
time-range-name
The
case-insensitive string of 1 to 32 characters. It
must start with an English letter. If the time range
is not configured, the system creates the rule.
However, the rule using the time range can take
effect only after you configure the time range.
For more information about time range, see ACL
and QoS Configuration Guide.
vpn-instance-name
The
case-sensitive string of 1 to 31 characters.
For an ACL used to filter packets, if you do not
specify a VPN instance, the rule applies to both
non-VPN packets and VPN packets.
For an ACL used by other features, if you do not
specify a VPN instance, the implementation
varies by feature. For more information, see the
configuration guide of the feature.
command enables
af11
af12
(10),
af22
af23
(18),
(20),
af33
af41
(28),
(30),
cs1
cs2
(8),
(16),
cs6
cs7
(40),
(48),
(46).
argument is in the
option, the rule
option, the
option, the rule
argument is a
argument is a
Table
13.
Advertisement
Chapters
Table of Contents
