H3C IE4300 Command Reference Manual page 1475

permit
if-match
continue
apply
if-match cost
Use
if-match cost
Use
undo if-match cost
Syntax
if-match cost cost-value
undo if-match cost
Default
No cost match criterion is configured.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
cost-value
Examples
# Configure node 10 in permit mode for routing policy policy1 to permit routes with a cost of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match cost 8
if-match interface
Use
if-match interface
Use
undo if-match interface
Syntax
if-match interface { interface-type interface-number }&<1-16>
undo if-match interface [ interface-type interface-number ]&<1-16>
Default
No output interface match criterion is configured.
Views
Routing policy node view
Match mode:
•
Permit.
•
Deny.
Match criterion.
Specify the next node to be matched.
Action.
to match routes that have the specified cost.
to restore the default.
: Specifies a cost in the range of 0 to 4294967295.
to match routes that have the specified output interfaces.
to remove the specified output interface match criterion.
6