H3C IE4300 Command Reference Manual page 1564

Table 2 Command output
Field
Multicast VLAN 100 Forwarding Table
Total 1 entries, 1 matched
00001
(1.1.1.1, 255.0.0.1)
Flags
List of sub-VLANs (3 in total)
display multicast-vlan group
Use
display multicast-vlan group
multicast VLANs.
Syntax
display multicast-vlan group [ source-address | group-address | slot
slot-number | verbose | vlan vlan-id ] *
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
source-address
source, this command displays information about multicast groups for all multicast sources in
multicast VLANs.
group-address
239.255.255.255. If you do not specify a multicast group, this command displays information for all
multicast groups in multicast VLANs.
slot slot-number
member device, this command displays information about multicast groups in multicast VLANs for
the master device.
: Displays detailed information.
verbose
Description
Forwarding entries for multicast VLAN 100.
Total number of (S, G) entries, and the number of matching entries.
Sequence number of the (S, G) entry.
(S, G) entry, where 0.0.0.0 in the S position means all multicast
sources.
Entry flag.
This field displays one flag or the sum of multiple flags. In this
example, the value 0x10000 means that the entry has only one flag
0x10000.
The following flags are available for an entry:
•
•
•
•
•
Sub-VLAN list of the multicast VLAN, and the total number of the
sub-VLANs.
: Specifies a multicast source by its IP address. If you do not specify a multicast
: Specifies a multicast group by its IP address in the range of 224.0.1.0 to
: Specifies an IRF member device by its member ID. If you do not specify a
0x1—The entry is in inactive state.
0x4—The entry fails to update.
0x8—The sub-VLAN information fails to update for the entry.
0x200—The entry is in GR state.
0x10000—The entry is a multicast VLAN forwarding entry.
to display information about multicast groups in
3