H3C IE4300 Command Reference Manual page 1566

Field
Sub-VLANs (1 in total)
Related commands
reset multicast-vlan group
multicast-vlan
Use multicast-vlan
existing multicast VLAN.
Use
undo multicast-vlan
Syntax
multicast-vlan vlan-id
undo multicast-vlan { all | vlan-id }
Default
No multicast VLANs exist.
Views
System view
Predefined user roles
network-admin
Parameters
: Specifies an existing VLAN by its ID in the range of 1 to 4094.
vlan-id
: Specifies all multicast VLANs.
all
Usage guidelines
You can configure a maximum of five multicast VLANs.
You must enable IGMP snooping for the VLAN to be configured as a multicast VLAN.
Examples
# Enable IGMP snooping for VLAN 100. Configure VLAN 100 as a multicast VLAN and enter its view.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 100
Description
•
0x10000000—This value represents one of the following
situations:


•
0x20000000—The device does not receive IGMPv2 or
IGMPv3 reports that match the (S, G) entry within an IGMP
general query interval.
•
0x40000000—The device does not receive IGMPv3
IS_EX (NULL) reports that match the (S, G) entry within an
IGMP general query interval.
Sub-VLAN list of the multicast VLAN, and the total number of
the sub-VLANs.
to configure a multicast VLAN and enter its view, or enter the view of an
to remove the configuration of multicast VLANs.
5
The entry is newly created.
The device receives an IGMP query that matches the
(S, G) entry but does not receive any matching
IGMPv1 reports within an IGMP general query interval.