H3C IE4300 Command Reference Manual page 1814

Usage guidelines
You can configure multiple NAS-ID and VLAN bindings in a NAS-ID profile.
A NAS-ID can be bound with more than one VLAN, but a VLAN can be bound with only one NAS-ID.
If you configure multiple bindings for the same VLAN, the most recent configuration takes effect.
Examples
# Bind NAS-ID 222 with VLAN 2 in NAS-ID profile aaa.
<Sysname> system-view
[Sysname] aaa nas-id profile aaa
[Sysname-nas-id-prof-aaa] nas-id 222 bind vlan 2
Related commands
aaa nas-id profile
session-time include-idle-time
Use
session-time include-idle-time
period in the user online duration sent to the server.
Use
undo session-time include-idle-time
Syntax
session-time include-idle-time
undo session-time include-idle-time
Default
The device does not include the idle timeout period in the user online duration sent to the server.
Views
ISP domain view
Predefined user roles
network-admin
Usage guidelines
Whether to configure the device to include the idle timeout period in the user online duration sent to
the server, depending on the accounting policy in your network. The idle timeout period is assigned
to users by the authorization server after the users pass authentication. For portal users, the device
includes the idle timeout period set for the online portal user detection feature in the user online
duration. For more information about online detection for portal users, see portal authentication
configuration in Security Configuration Guide.
If the user goes offline due to connection failure or malfunction, the user online duration sent to the
server is not the same as the actual online duration.
•
If the
session-time include-idle-time
sent to the server includes the idle timeout period. The online duration that is generated on the
server is longer than the actual online duration of the user.
•
If the
undo session-time include-idle-time
duration sent to the server excludes the idle timeout period. The online duration that is
generated on the server is shorter than the actual online duration of the user.
Examples
# Configure the device to include the idle timeout period in the online duration sent to the server for
users in ISP domain test.
<Sysname> system-view
to configure the device to include the idle timeout
to restore the default.
command is used, the user's online duration
command is used, the user's online
33