H3C IE4300 Command Reference Manual page 1459

IPv6 policy-based routing commands
apply next-hop
Use
apply next-hop
Use
undo apply next-hop
Syntax
apply next-hop [ vpn-instance vpn-instance-name ] { ipv6-address [ direct ]
[ track track-entry-number ] } &<1-2>
undo apply next-hop [ [ vpn-instance vpn-instance-name | inbound-vpn ]
ipv6-address&<1-2> ]
Default
No next hops are set.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
vpn-instance vpn-instance-name
case-sensitive string of 1 to 31 characters. The specified VPN instance must already exist.
ipv6-address
vpn-instance vpn-instance-name
belongs to the public network.
: Specifies that the next hop must be directly connected to take effect.
direct
track track-entry-number
: Indicates that the argument before it can be entered up to two times.
&<1-2>
Usage guidelines
You can specify multiple next hops for backup in one command line or by executing this command
multiple times.
With a next hop specified, the
Without any next hop specified, the
Examples
# Set a directly-connected next hop of 1::1.
<Sysname> system-view
[Sysname] ipv6 policy-based-route aa permit node 11
[Sysname-pbr6-aa-11] apply next-hop 1::1
description
Use
description
Use
undo description
to set next hops.
to remove next hops.
: Specifies the IPv6 address of the next hop. If you do not specify the
: Specifies a track entry by its number in the range of 1 to 1024.
undo apply next-hop
undo apply next-hop
to configure a description for an IPv6 policy node.
to restore the default.
: Specifies an MPLS L3VPN instance by its name, a
option or the
inbound-vpn
command removes the next hop.
command removes all next hops.
1
keyword, the next hop