H3C IE4300 Command Reference Manual page 1685

Table 5 Command output
Field
Interfaces
Type
Total
Reserved
Configured
Remaining
Usage
packet-filter
Use
packet-filter
Use
undo packet-filter
Syntax
packet-filter [ ipv6 | mac ] { acl-number | name acl-name } { inbound |
outbound } [ hardware-count ]
undo packet-filter [ ipv6 | mac ] { acl-number | name acl-name } { inbound |
outbound }
Default
No ACL is applied to an interface to filter packets.
Views
Layer 2 Ethernet interface view
VLAN interface view
Predefined user roles
network-admin
Parameters
: Specifies the IPv6 ACL type.
ipv6
: Specifies the Layer 2 ACL type.
mac
acl-number
•
2000 to 2999 for basic ACLs.
•
3000 to 3999 for advanced ACLs.
Description
Interface range for the resources.
Resource type:
•
TTI ACL—ACL resources used for interfaces. These resources are
used only for QinQ and VLAN mapping in the current software version.
•
PCL ACL—ACL resources used for policies, including resources used
by protocol packets and used by the application modules that
reference ACLs.
•
PCL Counter—Accounting resources used for policies.
•
IPCL Meter—Traffic policing resources used in inbound QoS policies.
•
EPCL Meter—Traffic policing resources used in outbound QoS
policies.
Total number of resources.
Number of reserved resources.
Number of resources that has been applied.
Number of resources that you can apply.
Configured and reserved resources as a percentage of total resources. If
the percentage is not an integer, this field displays the integer part. For
example, if the actual usage is 50.8%, this field displays 50%.
to apply an ACL to an interface to filter packets.
to remove an ACL from an interface.
: Specifies an ACL by its number. The following are available value ranges:
16