H3C IE4300 Command Reference Manual page 1761

Industrial switch series

Hide thumbs Also See for IE4300:

Table of Contents

remark-dscp-pass new-dscp

the packet to pass through. The

you can specify the

Usage guidelines

To use two rates for aggregate CAR, configure the

peak-information-rate

command without the

An aggregate CAR action takes effect only after it is used in a QoS policy.

# Configure aggregate CAR action aggcar-1, where CIR is 25600, CBS is 512000, and red packets

are dropped.

<Sysname> system-view

[Sysname] qos car aggcar-1 aggregative cir 25600 cbs 512000 red discard

Related commands

display qos car name

reset qos car name

reset qos car name

reset qos car name [ car-name ]

Predefined user roles

network-admin

: Specifies an aggregate CAR action by its name. This argument must start with a letter,

and is a case-sensitive string of 1 to 31 characters. If you do not specify an aggregate CAR action,

this command clears statistics for all aggregate CAR actions.

# Clear the statistics about aggregate CAR action aggcar-1.

<Sysname> reset qos car name aggcar-1

option. To use one rate for aggregate CAR, configure the

pir peak-information-rate

to clear the statistics about aggregate CAR actions.

: Remarks the packet with a new DSCP value and permits

argument is in the range of 0 to 63. Alternatively,

argument with

command with the

Chapters

Table of Contents

Ie4300-m Ie4320