H3C IE4300 Command Reference Manual page 1656

Parameters
vpn-instance-name
characters.
Usage guidelines
CAUTION:
Associating a VPN instance with an interface or disassociating a VPN instance from an interface will
clear the IP address and routing protocol settings of the interface.
Use this command to associate the VPN instance with the interface connected to the CE.
The specified VPN instance must have been created by using the
system view.
To associate a new VPN instance with an interface, first execute the
vpn-instance
Examples
# Associate VLAN-interface 1 with VPN instance vpn1.
<Sysname> system-view
[Sysname] interface vlan-interface 1
[Sysname-Vlan-interface1] ip binding vpn-instance vpn1
Related commands
ip vpn-instance
ip vpn-instance (system view)
Use
ip vpn-instance
VPN instance.
Use
undo ip vpn-instance
Syntax
ip vpn-instance vpn-instance-name
undo ip vpn-instance vpn-instance-name
Default
No VPN instances exist.
Views
System view
Predefined user roles
network-admin
Parameters
vpn-instance-name
characters.
Examples
# Create a VPN instance named vpn1 and enter its view.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
: Specifies a VPN instance by its name, a case-sensitive string of 1 to 31
command to remove the existing association.
(system view)
to create a VPN instance and enter its view, or enter the view of an existing
to delete a VPN instance.
: Specifies a VPN instance name, a case-sensitive string of 1 to 31
ip vpn-instance
6
command in
undo ip binding