H3C IE4300 Command Reference Manual page 1816

Syntax
access-limit max-user-number
undo access-limit
Default
The number of concurrent logins using the local user name is not limited.
Views
Local user view
Predefined user roles
network-admin
Parameters
max-user-number
1024.
Usage guidelines
This command takes effect only when local accounting is configured for the local user. The
command does not apply to FTP, SFTP, or SCP users. These users do not support accounting.
For this command to take effect on network access users, you also need to execute the
accounting start-fail offline
Examples
# Set the maximum number of concurrent logins to 5 for users using the local user name abc.
<Sysname> system-view
[Sysname] local-user abc
[Sysname-luser-manage-abc] access-limit 5
Related commands
accounting start-fail offline
display local-user
authorization-attribute (local user view/user group view)
Use
authorization-attribute
group. After the local user or a local user in the user group passes authentication, the device assigns
these attributes to the user.
Use
undo authorization-attribute
Syntax
authorization-attribute { acl acl-number | idle-cut minutes | ip-pool
ipv4-pool-name | ipv6-pool ipv6-pool-name | session-timeout minutes |
user-profile profile-name | user-role
work-directory directory-name } *
undo authorization-attribute { acl | idle-cut | ip-pool | ipv6-pool |
session-timeout
work-directory } *
Default
The working directory for FTP, SFTP, and SCP users is the root directory of the NAS. However, the
users do not have permission to access the root directory.
: Specifies the maximum number of concurrent logins, in the range of 1 to
command in the ISP domain view.
to configure authorization attributes for a local user or user
| user-profile
to restore the default of an authorization attribute.
role-name | vlan vlan-id |
| user-role
35
role-name | vlan |