H3C IE4300 Command Reference Manual page 1531

[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping host-tracking
Related commands
display igmp-snooping host-tracking
host-tracking
igmp-snooping enable
igmp-snooping last-member-query-interval
Use
igmp-snooping last-member-query-interval
interval for a VLAN.
Use
undo igmp-snooping last-member-query-interval
Syntax
igmp-snooping last-member-query-interval interval
undo igmp-snooping last-member-query-interval
Default
The IGMP last member query interval is 1 second.
Views
VLAN view
Predefined user roles
network-admin
Parameters
: Specifies an IGMP last member query interval in the range of 1 to 25 seconds.
interval
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command.
You can set the interval for a VLAN in VLAN view or globally for all VLANs in IGMP-snooping view.
For a VLAN, the VLAN-specific configuration takes priority over the global configuration.
Examples
# In VLAN 2, enable IGMP snooping, and set the IGMP last member query interval to 3 seconds.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping last-member-query-interval 3
Related commands
(IGMP-snooping view)
enable
igmp-snooping enable
last-member-query-interval
(IGMP-snooping view)
(IGMP-snooping view)
to set the IGMP last member query
35
to restore the default.