H3C IE4300 Command Reference Manual page 1559

Predefined user roles
network-admin
Parameters
: Specifies an aging time in the range of 210 to 18000 seconds.
seconds
Usage guidelines
You must enable PIM snooping for a VLAN before you execute this command.
Global ports include Layer 2 aggregate interfaces. A global downstream port or a global router port is
a global port that acts as a downstream port or router port, respectively.
Examples
# In VLAN 2, set the aging time to 600 seconds for global downstream ports and global router ports
on the new master device after a master/subordinate switchover.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] pim-snooping enable
[Sysname-vlan2] pim-snooping graceful-restart join-aging-time 600
Related commands
pim-snooping enable
pim-snooping graceful-restart neighbor-aging-time
Use
pim-snooping graceful-restart neighbor-aging-time
global neighbor ports on the new master device after a master/subordinate switchover.
Use
undo pim-snooping graceful-restart neighbor-aging-time
default.
Syntax
pim-snooping graceful-restart neighbor-aging-time seconds
undo pim-snooping graceful-restart neighbor-aging-time
Default
The aging time is 105 seconds for global neighbor ports on the new master device after a
master/subordinate switchover.
Views
VLAN view
Predefined user roles
network-admin
Parameters
: Specifies an aging time in the range of 105 to 18000 seconds.
seconds
Usage guidelines
You must enable PIM snooping in a VLAN before you execute this command.
Global ports include Layer 2 aggregate interfaces. A global neighbor port is a global port that acts as
a neighbor port.
7
to set the aging time for
to restore the