H3C IE4300 Command Reference Manual page 1460

Syntax
description text
undo description
Default
No description is configured for an IPv6 policy node.
Views
IPv6 policy node view
Predefined user roles
network-admin
Parameters
: Specifies a description, a case-sensitive string of 1 to 127 characters.
text
Examples
# Configure the description as Officeuse for IPv6 policy node 1.
<Sysname> system-view
[Sysname] ipv6 policy-based-route 1 permit node 1
[Sysname-pbr6-1-1] description Officeuse
display ipv6 policy-based-route
Use
display ipv6 policy-based-route
Syntax
display ipv6 policy-based-route [ policy policy-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
policy policy-name
If you do not specify a policy, this command displays information for all IPv6 PBR policies.
Examples
# Display all IPv6 policy information.
<Sysname> display ipv6 policy-based-route
Policy name: aaa
node 1 permit:
if-match acl 2000
apply next-hop 1000::1
Table 1 Command output
Field
node 1 permit
: Specifies a policy by its name, a case-sensitive string of 1 to 19 characters.
Description
The match mode of Node 1 is permit.
2
to display IPv6 PBR policy information.