H3C IE4300 Command Reference Manual page 1568

undo port { all | interface-list }
Default
A multicast VLAN does not have user ports.
Views
Multicast VLAN view
Predefined user roles
network-admin
Parameters
interface-list
port range in the form of
interface-number
: Specifies all user ports in the current multicast VLAN.
all
Usage guidelines
You can assign only Layer 2 Ethernet ports or Layer 2 aggregate interfaces to multicast VLANs.
Additionally, you can assign a port to only one multicast VLAN.
For ports to be assigned to a multicast VLAN, you must enable IGMP snooping for the VLANs to
which the ports belong.
Examples
# Assign GigabitEthernet 1/0/1 through GigabitEthernet 1/0/3 as user ports to multicast VLAN 100.
<Sysname> system-view
[Sysname] multicast-vlan 100
[Sysname-mvlan-100] port gigabitethernet 1/0/1 to gigabitethernet 1/0/3
port multicast-vlan
Use
port multicast-vlan
Use
undo port multicast-vlan
Syntax
port multicast-vlan vlan-id
undo port multicast-vlan
Default
A port does not belong to a multicast VLAN.
Views
Layer 2 Ethernet interface view
Layer 2 aggregate interface view
Predefined user roles
network-admin
Parameters
: Specifies a multicast VLAN by its VLAN ID in the range of 1 to 4094.
vlan-id
Usage guidelines
You can assign a port to only one multicast VLAN.
: Specifies a port in the form of
interface-type interface-number
.
to assign a user port to a multicast VLAN.
to restore the default.
interface-type interface-number
7
, or a
to
interface-type