H3C IE4300 Command Reference Manual page 1536

Syntax
igmp-snooping querier-election
undo igmp-snooping querier-election
Default
IGMP snooping querier election is disabled for a VLAN.
Views
VLAN view
Predefined user roles
network-admin
Usage guidelines
You must enable IGMP snooping for a VLAN before you execute this command.
For IGMP snooping querier election to take effect, you must enable the IGMP snooping querier.
Examples
# In VLAN 2, enable IGMP snooping, and enable IGMP snooping querier election.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] quit
[Sysname] vlan 2
[Sysname-vlan2] igmp-snooping enable
[Sysname-vlan2] igmp-snooping querier
[Sysname-vlan2] igmp-snooping querier-election
Related commands
igmp-snooping querier
igmp-snooping query-interval
Use
igmp-snooping query-interval
Use
undo igmp-snooping query-interval
Syntax
igmp-snooping query-interval interval
undo igmp-snooping query-interval
Default
The IGMP general query interval is 125 seconds.
Views
VLAN view
Predefined user roles
network-admin
Parameters
interval : Specifies an IGMP general query interval in the range of 2 to 31744 seconds.
to set the IGMP general query interval for a VLAN.
to restore the default.
40