H3C IE4300 Command Reference Manual page 1444

Use
undo ospfv3 timer retransmit
Syntax
ospfv3 timer retransmit seconds [ instance instance-id ]
undo ospfv3 timer retransmit [ instance instance-id ]
Default
The interval is 5 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the LSA retransmission interval in the range of 1 to 3600 seconds.
seconds
instance instance-id
Usage guidelines
After the device sends an LSA to its neighbor, it waits for an acknowledgment. If the device receives
no acknowledgment after the LSA retransmission interval elapses, it will retransmit the LSA.
To avoid unnecessary retransmissions, set an appropriate retransmission interval. For example, you
can set a large retransmission interval value on a low-speed link.
Examples
# Set the LSA retransmission interval to 12 seconds on VLAN-interface10 in instance 1.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ospfv3 timer retransmit 12 instance 1
ospfv3 trans-delay
Use
ospfv3 trans-delay
Use
undo ospfv3 trans-delay
Syntax
ospfv3 trans-delay seconds [ instance instance-id ]
undo ospfv3 trans-delay [ instance instance-id ]
Default
The transmission delay is 1 second.
Views
Interface view
Predefined user roles
network-admin
Parameters
: Specifies the transmission delay in the range of 1 to 3600 seconds.
seconds
instance instance-id
to remove the configuration.
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
to set the transmission delay for an interface.
to remove the configuration.
: Specifies an instance by its ID in the range of 0 to 255. The default is 0.
75