H3C IE4300 Command Reference Manual page 1557

Field
Expires: 00:03:01, FSM: J
display pim-snooping statistics
Use
display pim-snooping statistics
through PIM snooping.
Syntax
display pim-snooping statistics
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display statistics for the PIM messages learned through PIM snooping.
<Sysname> display pim-snooping statistics
Received PIMv2 hello:
Received PIMv2 join/prune:
Received PIMv2 error:
Received PIMv2 messages in total:
Received PIMv1 messages in total:
Table 4 Command output
Field
Received PIMv2 hello
Received PIMv2 join/prune
Received PIMv2 error
Received PIMv2 messages in total
Received PIMv1 messages in total
Related commands
reset pim-snooping statistics
pim-snooping enable
Use pim-snooping enable
Description
Remaining aging time for the downstream port or downstream
neighbor, and the finite state machine information.
For a global port, this field is always displayed.
For a non-global port, this field is displayed when one of the following
conditions exists:
•
The port is on the specified member device.
•
The port is on the master device and no member device is
specified.
100
100
0
200
0
Description
Number of received PIMv2 hello messages.
Number of received PIMv2 join/prune messages.
Number of received PIMv2 messages with errors.
Total number of received PIMv2 messages.
Total number of received PIMv1 messages.
to enable PIM snooping for a VLAN.
5
to display statistics for the PIM messages learned