H3C IE4300 Command Reference Manual page 1454

Examples
# Configure OSPFv3 area 1 as a stub area.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] area 1
[Sysname-ospfv3-1-area-0.0.0.1] stub
Related commands
default-cost
stub-router
Use
stub-router
Use
undo stub-router
Syntax
stub-router r-bit [ include-stub | on-startup seconds ] *
stub-router max-metric [ external-lsa [ max-metric-value ] | summary-lsa
[ max-metric-value ] | include-stub | on-startup seconds ] *
undo stub-router
Default
The router is not configured as a stub router.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
: Clears the R-bit of the Option field in Type-1 LSAs.
r-bit
max-metric
external-lsa max-metric-value
16777215. The default is 16711680.
summary-lsa max-metric-value
1 to 16777215. The default is 16711680.
include-stub
value 65535.
on-startup seconds
timeout time in the range of 5 to 86400 seconds.
Usage guidelines
You can use the
configure a router as a stub router.
•
The
stub-router r-bit
When the R-bit is clear, the OSPFv3 router can participate in OSPFv3 topology distribution
without forwarding traffic.
•
The
stub-router max-metric
feature. This feature enables OSPFv3 to advertise its locally generated Type-1 LSAs with a
(OSPFv3 area view)
to configure a router as a stub router.
to restore the default.
: Advertises the locally generated Type-1 LSAs with the maximum cost of 65535.
: Specifies the cost for Type-9 LSAs that reference Type-1 LSAs to the maximum
: Specifies the router as a stub router during reboot, and specifies the
stub-router r-bit
command clears the R-bit of the Option field in Type-1 LSAs.
: Specifies a cost for external LSAs, in the range of 1 to
: Specifies a cost for Type-3 and Type-4 LSAs, in the range of
command or
stub-router max-metric
command specifies the OSPFv3 max-metric router LSA
85
command to