H3C IE4300 Command Reference Manual page 1449

Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
router-id
Usage guidelines
The router ID is the unique identifier for the device to run OSPFv3 in the AS. An OSPFv3 process
cannot run without a router ID.
You must specify a unique router ID for each OSPFv3 process in an AS and on a router.
Examples
# Configure the router ID 10.1.1.3 for OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] router-id 10.1.1.3
Related commands
ospfv3
silent-interface(OSPFv3 view)
Use
silent-interface
packets.
Use
undo silent-interface
Syntax
silent-interface { interface-type interface-number | all }
undo silent-interface { interface-type interface-number | all }
Default
An interface can receive and send OSPFv3 packets.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
interface-type interface-number
: Specifies all interfaces.
all
Usage guidelines
Multiple processes can disable the same interface from receiving and sending OSPFv3 packets.
However, the
current process.
: Specifies a router ID in IPv4 address format.
to disable the specified interface from receiving and sending OSPFv3
silent-interface
to remove the configuration.
: Specifies an interface by its type and number.
command takes effect only on interfaces enabled with the
80