H3C IE4300 Command Reference Manual page 1551

Views
IGMP-snooping view
Predefined user roles
network-admin
Parameters
version-number
vlan vlan-list
VLAN by its ID or a range of VLANs in the form of
ID is in the range of 1 to 4094.
Usage guidelines
You must enable IGMP snooping for the specified VLANs before you execute this command.
You can specify the version for the specified VLANs in IGMP-snooping view or for a VLAN in VLAN
view. The configuration in IGMP-snooping view has the same priority as the VLAN-specific
configuration, and the most recent configuration takes effect.
Examples
# Enable IGMP snooping for VLAN 2 through VLAN 10, and specify IGMP snooping version 3 for
these VLANs.
<Sysname> system-view
[Sysname] igmp-snooping
[Sysname-igmp-snooping] enable vlan 2 to 10
[Sysname-igmp-snooping] version 3 vlan 2 to 10
Related commands
(IGMP-snooping view)
enable
igmp-snooping enable
igmp-snooping version
: Specifies an IGMP snooping version, 2 or 3.
: Specifies a space-separated list of up to 10 VLAN items. Each item specifies a
start-vlan-id to end-vlan-id
55
. The VLAN