display ip prefix-list
Use
display ip prefix-list
Syntax
display ip prefix-list [ name prefix-list-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
name prefix-list-name
characters. If you do not specify this option, the command displays statistics for all IPv4 prefix lists.
Examples
# Display the statistics for IPv4 prefix list abc.
<Sysname> display ip prefix-list name abc
Prefix-list: abc
Permitted 0
Denied 0
index: 10
Table 2 Command output
Field
Prefix-list
Permitted
Denied
index
deny
6.6.6.0/24
ge
le
Related commands
ip prefix-list
reset ip prefix-list
if-match ip
Use
if-match ip
an ACL or IPv4 prefix list.
to display IPv4 prefix list statistics.
: Specifies an IP prefix list by its name, a case-sensitive string of 1 to 63
Deny
6.6.6.0/24
Description
Name of the IPv4 prefix list.
Number of routes matching the criterion.
Number of routes not matching the criterion.
Index of an item.
Match mode of the item:
•
Permit.
•
Deny.
IP address and mask.
Greater-equal, the lower mask length limit.
Less-equal, the upper mask length limit.
to match IPv4 routes whose destination, next hop, or source address matches
12
ge
26
le
28