H3C IE4300 Command Reference Manual page 1659

Syntax
vpn-id vpn-id
undo vpn-id
Default
No VPN ID is configured for a VPN instance.
Views
VPN instance view
Predefined user roles
network-admin
Parameters
: Specifies a VPN ID for the VPN instance, in the form of OUI:Index. The OUI is a
vpn-id
hexadecimal number in the range of 0 to FFFFFF, and the index is a hexadecimal number in the
range of 0 to FFFFFFFF.
Usage guidelines
A VPN ID uniquely identifies a VPN instance. Different VPN instances must have different VPN IDs.
A VPN ID cannot be 0:0.
Examples
# Configure VPN ID 20:1 for VPN instance vpn1.
<Sysname> system-view
[Sysname] ip vpn-instance vpn1
[Sysname-vpn-instance-vpn1] vpn-id 20:1
Related commands
display ip vpn-instance
vpn-instance-capability simple (OSPF view)
Use
vpn-instance-capability simple
process.
Use undo vpn-instance-capability
process.
Syntax
vpn-instance-capability simple
undo vpn-instance-capability
Default
Routing loop detection is enabled for a VPN OSPF process.
Views
OSPF view
Predefined user roles
network-admin
to disable routing loop detection for a VPN OSPF
to enable routing loop detection for a VPN OSPF
9