H3C IE4300 Command Reference Manual page 1584

Table 8 Command output
Field
VLAN
(1::6, FF1E::2)
Port
Host
Uptime
Expires
Related commands
host-tracking
mld-snooping enable
mld-snooping host-tracking
display mld-snooping router-port
Use
display mld-snooping router-port
Syntax
display mld-snooping router-port [ vlan vlan-id ] [ verbose ] [ slot
slot-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
: Displays detailed information about dynamic router ports. If you do not specify this
verbose
keyword, the command displays brief information about dynamic router ports.
vlan vlan-id
VLAN, this command displays dynamic router port information for all VLANs.
slot slot-number
member device, this command displays dynamic router port information for the master device.
Examples
# Display brief information about dynamic router ports for VLAN 2.
<Sysname> display mld-snooping router-port vlan 2
VLAN 2:
Router ports (2 in total):
GE1/0/1
GE1/0/2
Description
VLAN ID.
(S, G) entry, where 0::0 in the S position means any IPv6 multicast
sources.
Member port.
IPv6 address of the host.
Length of time elapsed since the host joined the IPv6 multicast group.
Remaining timeout time for the host. The host timeout time is the same as
the aging timer of the port. The timer is reset when the port receives an
MLD report from the host.
This field displays timeout if the host times out.
(MLD-snooping view)
: Specifies a VLAN by its VLAN ID in the range of 1 to 4094. If you do not specify a
: Specifies an IRF member device by its member ID. If you do not specify a
to display dynamic router port information.
(00:01:30)
(00:00:23)
12