Display Ipv6 Dhcp Option-Group - H3C IE4300 Command Reference Manual

Use
undo default pool
Syntax
default pool pool-name
undo default pool
Default
No default DHCPv6 address pool is specified.
Views
DHCPv6 policy view
Predefined user roles
network-admin
Parameters
pool-name
characters.
Usage guidelines
In a DHCPv6 policy, the DHCPv6 server uses the default address pool to assign IPv6 address, IPv6
prefix, or other parameters to clients that do not match any user classes. If no default address pool is
specified or the default address pool does not have assignable IPv6 addresses or prefixes, the
assignment fails.
You can specify only one default address pool in a DHCPv6 policy. If you execute this command
multiple times, the most recent configuration takes effect.
Examples
# Specify the DHCPv6 address pool pool1 as the default DHCPv6 address pool in DHCPv6 policy 1.
<Sysname> system-view
[Sysname] ipv6 dhcp policy 1
[Sysname-dhcp6-policy-1] default pool pool1
Related commands
class pool
ipv6 dhcp policy

display ipv6 dhcp option-group

Use
display ipv6 dhcp option-group
Syntax
display ipv6 dhcp option-group [ option-group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
to restore the default.
: Specifies a DHCPv6 address pool by its name, a case-insensitive string of 1 to 63
to display information about a DHCPv6 option group.
7