H3C IE4300 Command Reference Manual page 1750

qos wrr weight
Use
qos wrr weight
Use
undo qos wrr
Syntax
qos wrr queue-id group 1 weight schedule-value
undo qos wrr queue-id
Default
All queues on a WRR-enabled interface are in WRR group 1, and queues 0 through 7 have a weight
of 1, 2, 3, 4, 5, 9, 13, and 15, respectively.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
: Specifies a queue by its ID. The value range for this argument is 0 to 7 or keywords in
queue-id
Table 18.
Table 18 The number-keyword map for the
Number
0
1
2
3
4
5
6
7
: Specifies WRR group 1. Only WRR group 1 is supported in the current software version.
group 1
: Allocates bandwidth to queues in packets.
weight
schedule-value
Usage guidelines
You must use the
queuing parameters for a queue on an interface.
Examples
# Enable packet-based WRR queuing on GigabitEthernet 1/0/1, assign queue 0 to WRR group 1,
and specify scheduling weight 10 for queue 0.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr weight
to configure the WRR queuing parameters for a queue on an interface.
to restore the default.
Keyword
be
af1
af2
af3
af4
ef
cs6
cs7
: Specifies a scheduling weight. The value range for this argument is 1 to 15.
command to enable WRR queuing before you can configure WRR
qos wrr
argument
queue-id
43