H3C IE4300 Command Reference Manual page 1485

Examples
# Configure node 10 of routing policy policy1 to set the backup next hop 1::1/64 for the route
destined for 100::1/64.
<Sysname> system-view
[Sysname] ipv6 prefix-list abc index 10 permit 100::1 64
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ipv6 address prefix-list abc
[Sysname-route-policy-policy1-10] apply ipv6 fast-reroute backup-nexthop 1::1
apply ipv6 next-hop
Use
apply ipv6 next-hop
Use
undo apply ipv6 next-hop
Syntax
apply ipv6 next-hop ipv6-address
undo apply ipv6 next-hop
Default
No next hop is set for IPv6 routes.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
ipv6-address
Usage guidelines
If you use this command to set a next hop for redistributed routes, the configuration does not take
effect.
Examples
# Configure node 10 in permit mode for routing policy policy1 to set next hop 3ffe:506::1 for IPv6
routes matching prefix list 100.
<Sysname> system-view
[Sysname] ipv6 prefix-list 100 permit 2::2 64
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ipv6 address prefix-list 100
[Sysname-route-policy-policy1-10] apply ipv6 next-hop 3ffe:506::1
display ipv6 prefix-list
Use
display ipv6 prefix-list
Syntax
display ipv6 prefix-list [ name prefix-list-name ]
Views
Any view
to set a next hop for IPv6 routes.
: Specifies the next hop IPv6 address.
to restore the default.
to display IPv6 prefix list statistics.
16