H3C IE4300 Command Reference Manual page 1450

Examples
# Disable VLAN-interface 10 from receiving and sending OSPFv3 packets in OSPFv3 processes
100 and 200.
<Sysname> system-view
[Sysname] ospfv3 100
[Sysname-ospfv3-100] router-id 10.100.1.9
[Sysname-ospfv3-100] silent-interface vlan-interface 10
[Sysname-ospfv3-100] quit
[Sysname] ospfv3 200
[Sysname-ospfv3-200] router-id 20.100.1.9
[Sysname-ospfv3-200] silent-interface vlan-interface 10
snmp context-name
Use
snmp context-name
Use
undo snmp context-name
Syntax
snmp context-name context-name
undo snmp context-name
Default
No SNMP contexts exist for OSPFv3.
Views
OSPFv3 view
Predefined user roles
network-admin
Parameters
context-name
Usage guidelines
The standard OSPFv3 MIB provides only single-instance MIB objects. For SNMP to correctly identify
OSPFv3 management information in the standard OSPFv3 MIB, you must configure a unique
context name for OSPFv3. If multiple OSPFv3 processes exist, you must assign a unique context to
each process.
Context is a method introduced to SNMPv3 for multiple-instance management. For SNMPv1/v2c,
you must specify a community name as a context name for protocol identification.
Examples
# Configure the SNMP context name as mib for OSPFv3 process 1.
<Sysname> system-view
[Sysname] ospfv3 1
[Sysname-ospfv3-1] snmp context-name mib
snmp trap rate-limit
Use
snmp trap rate-limit
number of SNMP notifications that can be output at each interval.
to configure an SNMP context for OSPFv3.
to restore the default.
: Specifies a context name, a case-sensitive string of 1 to 32 characters.
to set the SNMP notification output interval and the maximum
81