H3C IE4300 Command Reference Manual page 1471

Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Sets the cost type to OSPF Type-1 external route.
type-1
: Sets the cost type to OSPF Type-2 external route.
type-2
Examples
# Configure node 10 in permit mode for routing policy policy1 to set the cost type for routes that
have a tag of 8 to OSPF Type-1 external routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
[Sysname-route-policy-policy1-10] apply cost-type type-1
apply ip-precedence
Use
apply ip-precedence
Use
undo apply ip-precedence
Syntax
apply ip-precedence { value | clear }
undo apply ip-precedence
Default
No IP precedence is set.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
: Specifies an IP precedence in the range of 0 to 7.
value
: Clears the IP precedence of matching routes.
clear
Examples
# Configure node 10 in permit mode for routing policy policy1 to set an IP precedence of 3 for routes
matching prefix list 100.
<Sysname> system-view
[Sysname] ip prefix-list 100 permit 192.168.10.1 24
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match ip address prefix-list 100
[Sysname-route-policy-policy1-10] apply ip-precedence 3
to set an IP precedence for matching routes.
to restore the default.
2