H3C IE4300 Command Reference Manual page 1472

apply preference
Use
apply preference
Use
undo apply preference
Syntax
apply preference preference
undo apply preference
Default
No preference is set for a routing protocol.
Views
Routing policy node view
Predefined user roles
network-admin
Parameters
preference
Usage guidelines
If you have set preferences for routing protocols by using the
preference
routing protocols still use the preferences set by using the
Examples
# Configure node 10 in permit mode for routing policy policy1 to set the preference for OSPF
external routes to 90.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match route-type external-type1or2
[Sysname-route-policy-policy1-10] apply preference 90
apply prefix-priority
Use
apply prefix-priority
Use
undo apply prefix-priority
Syntax
apply prefix-priority { critical | high | medium }
undo apply prefix-priority
Default
No prefix priority is set, which means the prefix priority is low.
Views
Routing policy node view
Predefined user roles
network-admin
to set a preference for a routing protocol.
to restore the default.
: Specifies a preference in the range of 1 to 255.
command sets a new preference for the matching routing protocol. Unmatched
to set a prefix priority for routes.
preference
preference
to restore the default.
3
command, the
apply
command.