Matched: 0
Total matched: 0
Table 3 Command output
Field
Policy based routing information
for local
node 0 deny/node 2 permit
if-match acl
apply next-hop
Matched: 0
Total matched
Related commands
reset ip policy-based-route statistics
display ip policy-based-route setup
Use
display ip policy-based-route setup
Syntax
display ip policy-based-route setup
Views
Any view
Predefined user roles
network-admin
network-operator
Examples
# Display PBR configuration.
<Sysname> display ip policy-based-route setup
Policy name
pr01
aaa
aaa
Table 4 Command output
Field
Type
Interface
Description
Local PBR configuration and statistics.
Match mode of the node: permit or deny.
Compares packets with the ACL.
Specifies a next hop for permitted packets.
Number of successful matches on the node.
Total number of successful matches on all nodes.
Type
Interface
Forward
Vlan-interface2
Local
N/A
Global
N/A
Description
Type of the PBR:
•
Forward—Interface PBR.
•
Local—Local PBR.
•
Global—Global PBR.
Interface where the policy is applied.
This field displays N/A for local PBR and global PBR.
6
to display PBR configuration.